The NOCO Boost GB40 is a portable lithium-ion jump starter designed for cars‚ boats‚ motorcycles‚ and more. It features ultra-compact design‚ spark-proof technology‚ and reverse polarity protection for safe use.
Overview of the NOCO Boost GB40
The NOCO Boost GB40 is an ultra-compact and portable lithium-ion jump starter designed for vehicles like cars‚ boats‚ motorcycles‚ ATVs‚ and more. It offers advanced safety features‚ including spark-proof technology and reverse polarity protection‚ making it extremely safe for anyone to use. The GB40 can jump start 12-volt lead-acid batteries down to 2-volts and features a manual override for batteries below this threshold. Its lightweight design‚ integrated LED flashlight‚ and user-friendly interface make it a reliable emergency power solution for various applications.
Key Features and Applications
The NOCO Boost GB40 offers a range of key features‚ including a 1000A peak current‚ spark-proof technology‚ and reverse polarity protection. It is suitable for jump-starting 12-volt lead-acid batteries in cars‚ trucks‚ boats‚ motorcycles‚ and more. The GB40 also includes an integrated LED flashlight with multiple modes‚ such as SOS and strobe‚ for added convenience. Its compact and lightweight design makes it portable and easy to store‚ while the manual override feature allows use with low-voltage batteries. This versatile tool is ideal for emergency situations and everyday use.
Safety Information and Precautions
Read and understand all safety information before use. Failure to follow guidelines may result in electrical shock‚ explosion‚ or fire‚ causing serious injury or property damage.
General Safety Warnings
Always read and follow the safety instructions carefully. Failure to comply may result in electrical shock‚ explosion‚ or fire‚ leading to serious injury‚ death‚ or property damage. Wear protective eyewear and avoid overcharging. Never modify the device or use damaged cables‚ as this can cause malfunctions. Keep the GB40 away from children and ensure proper ventilation when in use. Do not submerge in water or expose to extreme temperatures. Misuse of the lithium-ion battery can cause it to rupture or ignite.
Proper Handling and Storage
Store the NOCO Boost GB40 in a cool‚ dry place‚ away from direct sunlight and moisture. Avoid extreme temperatures between -20°C and 50°C. Keep the device clean and dry‚ ensuring all ports are closed when not in use. Do not drop or subject it to physical stress. When storing for extended periods‚ charge the battery to at least 50% capacity. Always use the provided USB cable and avoid third-party accessories that may damage the unit. Regularly inspect cables for wear and tear.
Understanding the User Interface
The NOCO Boost GB40 features a user-friendly interface with a Power Button‚ Boost LED‚ Error LED‚ and Charge LEDs‚ providing clear indicators for power‚ jump starting‚ errors‚ and battery level status.
Charge LEDs and Their Indications
The NOCO Boost GB40 features four Charge LEDs (25%‚ 50%‚ 75%‚ 100%) that indicate the internal battery’s state of charge. The 25% LED pulses until reaching 25%‚ then turns solid red. At 50%‚ the red LED remains solid‚ and the 75% LED pulses until fully charged. Once fully charged‚ all LEDs turn solid green. This system provides a clear visual indication of the battery’s charge level‚ ensuring users can monitor and manage the device’s power effectively.
Power Button and Boost LED Functions
The Power Button turns the device on/off and controls the integrated flashlight. The Boost LED illuminates white when jump-starting and flashes during manual override. If the LED blinks red‚ it indicates low battery or errors. The Boost LED also signals readiness for jump-starting by staying solid white. Pressing the power button cycles through flashlight modes‚ while holding it activates the light. The LED provides critical status updates‚ ensuring safe and effective operation of the GB40 during charging and jump-starting processes.
Charging the NOCO Boost GB40
Charge the GB40 using the included USB cable and a 5V‚ 2.1A adapter. The LED indicators show charge progress: 25‚ 50‚ 75‚ and 100. Red indicates lower levels‚ yellow medium‚ and green when fully charged. Charging stops automatically when complete to prevent overcharging. Ensure the device is turned off during charging for optimal performance and safety.
Recharging the Internal Battery
To recharge the GB40‚ connect it using the included USB charge cable to a compatible USB port or 5V‚ 2.1A adapter. The internal battery charges in stages‚ with LEDs indicating progress: red for low‚ yellow for medium‚ and green for full charge. Charging automatically stops when complete to prevent overcharging. Ensure the device is turned off during charging for optimal performance. The process typically takes several hours‚ depending on the battery’s depletion level. Always use the provided cable and adapter for safety and efficiency.
Interpreting the Charging LEDs
The GB40 features four LEDs indicating the battery’s charge level: 25%‚ 50%‚ 75%‚ and 100%. Each LED pulses until the corresponding charge level is reached‚ then turns solid. At 100%‚ all LEDs illuminate to confirm a full charge. The LEDs also provide real-time feedback during charging‚ ensuring users can monitor progress easily. This intuitive system helps prevent overcharging and keeps users informed about the device’s readiness for use. The LEDs are a crucial part of the GB40’s user-friendly design.
Jump Starting with the NOCO Boost GB40
The GB40 safely jump starts vehicles with its ultra-compact design and spark-proof technology. It supports 12-volt lead-acid batteries and features reverse polarity protection for user safety and convenience.
Step-by-Step Jump Starting Process
To jump start a vehicle with the NOCO Boost GB40‚ first verify the battery voltage and ensure it is above 2 volts. Connect the HD battery clamps to the correct terminals‚ with the positive clamp on the positive terminal and the negative clamp on the negative terminal or vehicle chassis. Turn on the GB40 and press the Boost button to activate. Start the vehicle and remove the clamps in reverse order. If the vehicle doesn’t start‚ wait 20-30 seconds before retrying. Do not attempt more than five consecutive jumps within 15 minutes.
Using Manual Override for Low Voltage Batteries
The NOCO Boost GB40 features a Manual Override mode for batteries below 2 volts. Press and hold the red exclamation button for three seconds to activate. The Boost LED will flash‚ indicating readiness. Connect the clamps to the battery terminals‚ ensuring correct polarity. Start the vehicle and remove the clamps. Use this mode with caution‚ only for 12-volt lead-acid batteries. If the battery is severely depleted‚ allow the GB40 to pre-charge for 20 seconds before starting the engine. This ensures safe and effective jump starting in challenging conditions.
Troubleshooting Common Issues
Common issues with the NOCO Boost GB40 include error LED blinking‚ low voltage detection‚ and charging problems. If the Error LED blinks red‚ the battery may be too hot or disconnected improperly. For low voltage‚ use Manual Override if the battery is below 2 volts; If the GB40 doesn’t charge‚ ensure the USB cable is securely connected and undamaged. Consult the user guide or contact NOCO support for unresolved issues to ensure optimal performance and safety.
Error LED Indications and Solutions
The Error LED on the NOCO Boost GB40 illuminates red to indicate issues. If it blinks red‚ the internal battery is too hot or disconnected improperly. Allow it to cool or check connections. A solid red light may indicate low voltage or reverse polarity. Ensure the battery clamps are connected correctly and avoid short circuits. If the error persists‚ consult the user manual or contact NOCO support for assistance. Always address these issues promptly to maintain safety and device functionality;
Diagnosing Common Problems
Common issues with the NOCO Boost GB40 include low charge levels or faulty connections. Check the Charge LEDs to assess battery status. If the device doesn’t power on‚ ensure the Power Button is functioning and the unit is charged. For connection issues‚ verify cable integrity and proper polarity. If the Boost LED doesn’t activate‚ ensure the battery voltage meets requirements. Refer to the Error LED guide for specific fault diagnoses. Always consult the user manual for detailed troubleshooting steps or contact NOCO support for unresolved issues.
Technical Specifications
The NOCO Boost GB40 features a lithium-ion battery with a peak current of 1000A. It operates within a temperature range of -30°C to 50°C for charging and storage‚ ensuring versatility in various environments.
Internal Battery and Power Ratings
The NOCO Boost GB40 is equipped with a high-capacity lithium-ion battery‚ delivering a peak current of 1000A for robust jump-starting power. The battery features advanced management systems to ensure safe and efficient performance. With an operating temperature range of -30°C to 50°C‚ the GB40 is suitable for use in extreme conditions. Its compact design houses a powerful cell‚ providing up to 20 jump starts on a single charge‚ making it ideal for vehicles with large engines. The battery is also protected against overcharge and discharge‚ ensuring longevity and reliability.
Operating and Storage Temperature Ranges
The NOCO Boost GB40 operates effectively in temperatures ranging from -30°C to 50°C‚ ensuring reliability in extreme conditions. For storage‚ the recommended temperature range is -20°C to 50°C‚ avoiding prolonged exposure to extreme heat or cold. Proper temperature management is crucial for maintaining battery health and performance. Always store the GB40 in a cool‚ dry place to preserve its capacity and longevity. Avoid leaving it in direct sunlight or freezing environments for extended periods.
Additional Features
The NOCO Boost GB40 includes an integrated LED flashlight with seven modes: 100%‚ 50%‚ 10%‚ SOS‚ Blink‚ Strobe‚ and Off‚ enhancing visibility in low-light situations.
Integrated LED Flashlight Modes
The NOCO Boost GB40 features a built-in LED flashlight with seven versatile modes: 100%‚ 50%‚ 10%‚ SOS‚ Blink‚ Strobe‚ and Off. These modes provide adaptability for different situations‚ from bright task lighting to emergency signaling. The flashlight enhances visibility in low-light environments‚ making it ideal for nighttime jump starts or camping. The modes are easily cycled using the Power button‚ ensuring quick access to the desired light setting without unnecessary complexity. This feature adds practicality and convenience to the device’s functionality.
Warranty and Support Information
The NOCO Boost GB40 comes with a limited warranty for the original purchaser. Contact support@no.co or call 1.800.456.6626 for inquiries. Request an RMA for service.
Limited Warranty Details
The NOCO Boost GB40 is covered by a limited warranty for the original purchaser. This warranty excludes normal wear‚ cosmetic damage‚ and altered serial numbers. The warranty period begins at purchase and covers defects in materials and workmanship. For warranty claims‚ contact NOCO Support to obtain an RMA number. The product must be returned in its original form for repair or replacement. Warranty voids if misused or tampered with.
How to Contact NOCO Support
For assistance with the NOCO Boost GB40‚ contact support at 1.800.456.6626 or email support@no.co. Visit www.no.co/support for comprehensive resources and troubleshooting guides. For personalized support‚ go to www.no.co/connect. Mail inquiries can be sent to NOCO at 30339 Diamond Parkway‚ 102 Glenwillow‚ OH 44139. Ensure to include your product details and issue description for prompt assistance.